Bathroom renovation cost in Ottawa: powder room to ensuite
By Rinku Singh
Published October 23, 2026
Bathroom renovations in Ottawa typically run $7,500 to $70,000 depending on size, scope, and finish level. A powder room refresh sits at the low end; a custom ensuite with a walk-in shower, freestanding tub, and heated floor sits at the top. These are typical Ottawa ranges, verified September 2026, before HST.
What does a bathroom renovation cost in Ottawa in 2026?
The cost depends on the size of the room and whether you are working within the existing footprint or moving walls and plumbing.
- Powder room — $7,500 to $15,000. Vanity, toilet, tile, lighting, and paint in a half bath.
- Full bathroom — $20,000 to $40,000. Tub or shower, tile, vanity, fixtures, ventilation, and finishes in the existing footprint.
- Ensuite or custom — $40,000 to $70,000. Walk-in shower, freestanding tub, heated floor, custom vanity, or a moved layout.
These are typical Ottawa ranges, verified September 2026, before HST. Every bathroom is quoted individually after a site visit to measure and discuss priorities.
What drives the cost of an Ottawa bathroom renovation?
Four things move the number the most: tile area, plumbing moves, shower glass, and heated floors.
Tile is the biggest labour cost. A small powder room with 50 square feet of wall and floor tile installs in two days. A large ensuite with 300 square feet of tile, a shower niche, and a custom patterned floor takes a week or more. Tile material ranges from $3 per square foot for basic ceramic to $20 for large-format porcelain or natural stone.
Moving plumbing is the second-biggest cost driver. Keeping the toilet, vanity, and shower in their current locations saves thousands of dollars. Moving the toilet across the room means re-routing the drain line through the floor joists or slab; that is typically $2,000 to $4,000 in plumbing labour plus patching and finishing. Moving the shower or tub adds another $1,500 to $3,000.
Shower glass for a frameless walk-in enclosure costs $1,500 to $3,000 depending on size and configuration. A single fixed panel is cheaper than a hinged door; custom angles or a neo-angle enclosure cost more. A prefab tub-shower combo with a curtain costs $600 to $1,200 installed and saves both tile and glass expense.
Heated floors add about $15 to $25 per square foot for the mat, thermostat, and installation. For a 60-square-foot bathroom that is $900 to $1,500. It is worth it if you are already ripping out the old floor; adding it later means tearing up tile that was just installed.
Do I need a permit for a bathroom renovation in Ottawa?
Most bathroom renovations do not require a building permit if you are working within the existing footprint and not moving structural walls. Replacing tile, fixtures, and flooring in place is exempt.
You do need a permit if you are:
- Removing or moving a structural wall.
- Moving plumbing that requires changes to the drain stack or supply risers.
- Adding a new bathroom where one did not exist before.
- Relocating a bathroom to a different part of the house.
Electrical work for new circuits, outlets, or exhaust fans must meet code but is typically covered by the contractor’s ESA notification process rather than a separate building permit. Plumbing and gas work are similar; licensed trades notify their regulatory bodies but a building permit is not always required unless structure is altered.
When in doubt, ask your contractor. They should know whether the scope requires a permit and should include the permit fee and application process in the quote if it does.
Source: City of Ottawa building permits page, checked 2026-09-19.
How long does a bathroom renovation in Ottawa take?
A powder room takes one to two weeks. A full bathroom takes two to four weeks. A custom ensuite with tile, heated floors, and custom features takes four to six weeks from demo to completion.
Demo and rough-in are the first phase: removing old fixtures, tile, and drywall, then roughing in new plumbing and electrical. That is typically two to three days for a small bathroom, up to a week for a large ensuite.
Tile installation takes the longest. A small powder room with 50 square feet of tile installs in two days once the substrate is ready. A large shower with floor-to-ceiling tile, a niche, and a custom floor pattern takes five days or more when grout cure time is factored in.
Fixture installation and finishing are the final phase: vanity, toilet, shower glass, mirrors, lighting, and paint. That is typically three to five days once the tile is done.
Lead times for fixtures and tile can add weeks to the schedule. Custom vanities take four to eight weeks to build. Tile that is not in stock may take two to four weeks to arrive. We order everything before demo starts to avoid delays waiting for materials.
How do I pick tile for an Ottawa bathroom?
Pick tile based on durability, slip resistance, and maintenance, not just looks. Large-format porcelain (12x24 or larger) is durable, water-resistant, and easy to clean. Small mosaic tile (1x1 or 2x2) has more grout lines, which means more maintenance, but is standard for shower floors because the grout lines add slip resistance.
For shower floors, use a textured or slip-resistant tile rated for wet areas. Smooth polished tile is unsafe in a shower. Mosaic, pebble tile, or textured porcelain are all good choices. The tile should be rated for wet areas and have a coefficient of friction (COF) of at least 0.6 for barefoot use.
For walls, large-format porcelain is the most popular choice in Ottawa bathrooms because it has fewer grout lines and a clean modern look. Ceramic subway tile is a classic option and costs less but has more grout to maintain. Natural stone (marble, travertine) looks luxurious but requires sealing and more maintenance than porcelain.
Heated floors work with any tile but work best with porcelain or ceramic because they conduct heat well. Natural stone also works but is more expensive. Luxury vinyl and laminate flooring should not be used with heated floors because they can warp.
What should you expect from us?
We walk every Ottawa bathroom client through tile and fixture choices before ordering, so the look, durability, and maintenance level match their expectations.
The quote includes fixture supply and installation, all tile supply and labour, plumbing and electrical rough-in and finish, drywall and paint, and ventilation. Custom vanities, heated floors, and shower glass are line items that can be added or removed based on budget.
We order all materials after the quote is signed and confirm lead times before scheduling demo. Typical payment terms are a deposit at signing, a progress payment after rough-in and tile, and final payment at completion after a joint walkthrough.
Tile and fixture samples are reviewed during the planning phase. We recommend visiting a tile showroom to see large samples in person; screen colours do not always match real tile. Once tile and fixtures are ordered, changes are difficult because suppliers do not accept returns on custom or cut-to-order materials.
Ready to plan yours? Read the full bathroom renovations service page or request a quote and we will visit your Ottawa home to measure, discuss your priorities, and walk through material options.